Lean cycle 3

If we let the person who’s best at performing the “specify” function handle more of that work, then we may also need to coordinate handoffs between ourselves. Adding the specify-complete column communicates to the team that a work item which was previously in the specify state is now ready to be pulled by anyone who wants to move it to the execute state. Work that is still in the specify state is not eligible to be pulled yet. If the owner of a ticket in the specify state wants to hand it off, he can put it in the complete buffer. If he doesn’t want to hand it off, he can move it directly into the execute state as long as capacity is available. It might be that the execute state is full, and the only eligible work is to pull another ticket from the ready queue into specify.

Frederick Winslow Taylor , the father of scientific management , introduced what are now called standardization and best practice deployment. In Principles of Scientific Management , (1911), Taylor said: "And whenever a workman proposes an improvement, it should be the policy of the management to make a careful analysis of the new method, and if necessary conduct a series of experiments to determine accurately the relative merit of the new suggestion and of the old standard. And whenever the new method is found to be markedly superior to the old, it should be adopted as the standard for the whole establishment."

I race a Porsche 356 (racecar) 1620 cc four cylinder engine. I run /1 compression. My Solex carbs (a 2 barrel for each two cylinders) run 160 main jets and 160 air correction jets. I must be close to /1 fuel air mixture because the car runs good, the plugs look good, the exhaust looks good. I’m thinking about experimenting with 112 octane Exxon Oxygenated fuel and I don’t have access to a dyno. If the fuel has 10 percent oxygen I assume I would need 10 percent larger main jets like maybe 175 mains or I guess I could use smaller air correction jets. The fuel I use now is 110 octane race gas non oxygenated.
How should I determine that correct /1 mixture.

Lean cycle 3

lean cycle 3


lean cycle 3lean cycle 3lean cycle 3lean cycle 3lean cycle 3